Maha Jaya Packing

sql
RING JOINT GASKET
Hover to Zoom

22 Jun 2020
1 CALL
IDR CALL

Specification of

RING JOINT GASKET
JOINT GASKET RING The R-type ring gasket can be ordered in two different profiles, oval or octagonal in cross section. Both types have the same pitch diameter as the corresponding flange groove. This gasket is used in pressures up to 5,000 PSI. The oval type is the only gasket that fits the bottom radius of the radius. Flanges with lower down grooves will receive good style.

RX-Series Gaskets
RX gaskets are designed for pressures up to 5,000 PSI. They can be exchanged with R-oval or R-octagonal rings used on API 6B flanges. RX type gaskets perform very well in 6B flanged blowout prevers blocks, requiring an additional mass of RX gaskets to support higher pressure with higher vibration and heavier weight of this unit.

BX - Series Gaskets
The BX Series can only be used with 6BX flanges and 16BX hubs. BX Gaskets are designed for determination of high pressure starting at 5,000 lbs. And it ends with 20,000 lbs. The diameter pitch on the BX gasket is slightly larger than the pitch diameter of the flange. This forces the gasket to seal initially at its outer corner and both seals with its inner angle when pointing to their respective torque settings.

RING JOINT GASKET

Graphite Gasket

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1

 

Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot